Home Contact Us   Catalogue Request  |  Dealer Enquiry
 SEARCH


delivering total solutions ..
..millenium technology
We, at Techmark, are committed for Customer Delight and not only Customer Satisfaction.

Products
Hand-Held Flue Gas Analysers
Portable Flue Gas Analysers
Continuous Emission Monitors (CEM's)
Dust / Opacity Monitors
Ambient Air Quality Monitoring Stations
Engine Exhaust Analysers
Gas Detectors
Efficiency Monitoring
Water Quality
Meteorology
Pressure & Flow Measurement : AIR
Pressure & Flow Measurement : LIQUID
Temperature Measurement
Samplers & Sample Preparation Equipment
Biogas-/ Syngas Analysis
Engine Exhaust Gas Analysis
Mercury Monitoring
Source / Stack Testing
Effluent Monitoring


  Products > Gas Detectors > Sub-Products > Fixed Gas Detector > GMA 81 / GMA 84 /
GMA 88

The GMA 81 (single channel monitor) for one remote sensor, the GMA 84 (4 channel monitor) for four sensors and the GMA 88 (up to 8 sensors) are the compact models of the GMA 101 and 104 for direct wall mounting.

The GMA 81 A and GMA 84 A provide an additional bright flashlight and a buzzer (100dB) for alarm signals. Its compact design makes the GMA 81/84 the ideal system wherever only a few detection points are to be monitored.

 Downloads
Brochure for GMA 81
Product Information PDF
Product Information GMA88PDF
Order Detail
In combination with GfG's remote sensors the new evaluation and control modules for the ideal fixed monitoring equipment for more than 100 different combustible and toxic gases and oxygen. Every controller can be flexibly adapter to its measurement task. In addition to the selection of gas and concentration the three alarm thresholds can be variably set throughout the detection range. For alarm or fault signals every controller provides 4 voltage-free relays, which can be individually set as NC or NO contacts respectively for open or closed circuit system. The 3 digit LED display allows the permanent check of the gas concentration. Detection range, gas and measurement unit are displayed on pressing a key. Menu driven zeropoint adjustment and calibration via keypad avoid unconfortable turning of potentiometers. An analog 4-20 mA output of the standardized sensor signal facilitates the connection of additional meters or recorders.

Just advise of your measurement problem, we offer the individual solution.

  - Single Channel (GMA 81), 4-Channel (GMA 84) or 8-Channel (GMA88) Models
  - Robust Enclosure for Wall Mounting Dim.: 130 x 185 x 95 mm (WxHxD)
  - With or without built-in Alarm
  - Protection Class IP 54
  - Easily Accessible Front Terminals
  - GMA81 EC Type Approval: BVS 03 ATEX G 006 X, PFG-Nr. 41300600 P

TECHNICAL DATA
Display :
3 digit LED for gas concentration and adjustment parameters, additional digital menu point display, LEDs for operation, fault, alarms 1, 2 and 3.
Adjustment elements :
Keys for variable setting of alarm thresholds, zeropoint and calibration.
Function keys :

Alarm reset, test and function check of detection range and calibration, test of relay functions.

Input signal : 0.2 .. 1 mA and 4 .. 20 mA
Output signal : 4 .. 20 mA
Current supply : 230 V AC / 24 V DC
Alarm relaying :
4 voltage-free relays for controlling of external devices by alarm 1, 2, 3 and fault. Switching performance: 230 V / 4 A.
Safety :
Continuous self monitoring of processor function, under and over voltages.
Dimensions : 130 x 209 x 95 mm (WxHxD) GMA 81
130 x 247 x 95 mm (WxHxD) GMA 81 A
256 x 216 x 123 mm (WxHxD) GMA 84
256 x 254 x 123 mm (WxHxD) GMA 84 A