Home Contact Us   Catalogue Request  |  Dealer Enquiry
 SEARCH


delivering total solutions ..
..millenium technology
We, at Techmark, are committed for Customer Delight and not only Customer Satisfaction.

Products
Hand-Held Flue Gas Analysers
Portable Flue Gas Analysers
Continuous Emission Monitors (CEM's)
Dust / Opacity Monitors
Ambient Air Quality Monitoring Stations
Engine Exhaust Analysers
Gas Detectors
Efficiency Monitoring
Water Quality
Meteorology
Pressure & Flow Measurement : AIR
Pressure & Flow Measurement : LIQUID
Temperature Measurement
Samplers & Sample Preparation Equipment
Biogas-/ Syngas Analysis
Engine Exhaust Gas Analysis
Mercury Monitoring
Source / Stack Testing
Effluent Monitoring


  Products > Gas Detectors > Sub-Products > Portable Gas Detector >
Single Gas Detector > Exotector G600

The Exotector gives an alarm before a combustible gas has endangered the ambient air to an explosive gas-air mixture. The alarm threshold is standardly set at a concentration of 20% of the lower explosion level (20% LEL). The catalytic combustion principle (CC) is a proven detection principle in the gas warning industry. It has the advantage that it offers a safe possibility to monitor all dangers that can occur through combustible gases by means of a safety-calibration.



 Downloads
Product Information PDF
Order Detail
The Exotector is available in different versions: Next to the measure and warning device for monitoring of the lower explosion limit (LEL) our product range offers detectors for monitoring of smallest volumes (0 to 8000 ppm) and concentrations of up to 100 Vol.%.

Before entering manholes and closed rooms these can be examined for gas dangers by means of a built-in, electronic pump. Accessories like sampling hoses with flow adapter and telescopic probes allow for diverse applications in different industries, gas suppliers and municipal areas.

  - Up to 3 detection ranges for combustible gases and vapours
  - Measurement in diffusion mode and with built-in pump
  - Easy handling
  - Explicit analogue display with colourful marked danger zones
  - Optical and audible alarm
  - Up to 10 hours of continuous operation

The Exotector is available for all common combustible gases. The combination of two detection principles enables the Exotector to detect even smallest amounts of gases from a leakage and to monitor in the LEL-range thereby ensuring a safe alarm of explosion danger up to a 100 Vol. %.
Version Detectable Gases* Detection Principles Detection Range
Exotector G615P
CH4 and other combustible gases and vapours Thermal Conductivity 0 to 50% (100%) LEL
Exotector G624P CH4, natural gas and other combustible gases and vapours Thermal Conductivity, Catalytic Combustion 0 to 100% LEL
0 to 5 Vol.% CH4
0 to 100 Vol.%
Exotector G634P CH4, natural gas and other combustible gases and vapours Thermal Conductivity, Catalytic Combustion 0 to 8000ppm
0 to 100% LEL
0 to 100 Vol.%

TECHNICAL DATA
Gases :
Combustible gases and vapors
(Fuel vapors, natural gas, Ethane, Methane, Propane, Butane, Hydrogen)
Ranges :
Micro (0-15 %LEL)
0 to 100 %LEL
0 to 100 %Vol
Detection Principles (sensors) :

Catalytic Combustion (%LEL)
Thermal Conductivity (%Vol)

Response Time t90 :
< 10 seconds
Gas Supply : Diffusion and built-in sampling pump
Sensor Life : > 60 month
Environmental Conditions : Temperature: -10 to +50°C
Humidity : 0 to 99 % r.h.
Pressure: 800 to 1200 hPa
Power Source :
Rechargeable battery pack
Operation Time :
> 10 hours depending on pump sampling time
Display : Analog scale, 45 mm, range switch
Alarm (latching or non-latching) : visual and audible
Pump Performance : 0,5l/min average (0,25l/min minimum)
10.000 Pa; up to 10 meter sampling line
Casing : Anti static plastics
weight: 750…800 g
Dimensions: 90 x 130 x 45 mm (WxHxD)
Approvals : Ex is G5 / BVS T6725