Home Contact Us   Catalogue Request  |  Dealer Enquiry
 SEARCH


delivering total solutions ..
..millenium technology
We, at Techmark, are committed for Customer Delight and not only Customer Satisfaction.

Products
Hand-Held Flue Gas Analysers
Portable Flue Gas Analysers
Continuous Emission Monitors (CEM's)
Dust / Opacity Monitors
Ambient Air Quality Monitoring Stations
Engine Exhaust Analysers
Gas Detectors
Efficiency Monitoring
Water Quality
Meteorology
Pressure & Flow Measurement : AIR
Pressure & Flow Measurement : LIQUID
Temperature Measurement
Samplers & Sample Preparation Equipment
Biogas-/ Syngas Analysis
Engine Exhaust Gas Analysis
Mercury Monitoring
Source / Stack Testing
Effluent Monitoring


  Products > Gas Detectors > Sub-Products > Fixed Gas Detector > CC24 EX

The transmitter CC 24 EX is the ideal transmitter for monitoring combustible gases up to 100% LEL. The proven detection principle catalytic combustion detects all combustible gases in the ambient air. An individual safety calibration of the transmitter protects against explosive gases and vapors in every atmosphere. The amplifier of the transmitter assures a safe transmission of the measurement signal towards the controller.


 Downloads
Product Information PDF
Potentiometer and measurement contacts behind a service lid allow for easy calibration on-site. The casing is available up to IP 68, which means that it is dirt-, dust- and waterproof. The CC 24 gets calibrated before shipment. Installation is made easy by wall mounting. The distance between transmitter and controller can be more than 500 yards.

  > Advanced transmitter with high reliability
  > Catalytic combustion for combustible gases in the LEL range
  > Fast response time
  > Long-time stable sensors, thereby reduced follow-up costs
  > Ex-proof (ATEX) and function tested
  > 0.2 .. 1 mA or 4 .. 20 mA output signal
  >Service lid for:
      - Measurement of output signal
      - Service switch for output signal suppression allows for maintenance without alarm         activation
      - Simple one-man calibration on-site
      - Solid aluminium casing, IP 54 (IP 68 optionally)
      - Pluggable sensor cell in stainless steel sleeve, replaceable without opening the casing
      - Sensor cell is poison resistant
Detectable Gases Detection Principles Detection Range
CH4, C3H8, C9H20, C2H6O, combustible gases and vapors Catalytic Combustion 0 to 50/100 % LEL

TECHNICAL DATA
Measuring gas :
Combustible gases
Measuring range :
0 .. 50 bis 0 ..100 % LEL.Respectively in ppm range

Gas supply :

Diffusion through sintered stainless steel filter

Response time : TAlarm< 8 seconds (depending on the type of gas)
Humidity : 5 .. 90 % r.h.
Pressure : 920 .. 1080 hPa
Cable connection :
PG11
Sensor life :
About 5 years
Casing protection : IP 54 / IP 68 up to 10 m (Option)
Cable length to controller : Up to 300m (3x0,75mm cable)
Bigger 300m (3x1,5 mm cable) shielded cable
Output signal : 0,2 ..1 mA or 4..20 mA
Power supply : 18..24 V, 100 mA
Ambient temperature : -20...+40 °C tested (ex-approval)
-20...+55 °C (function-tested)
Dimensions : 80 x 125 x 57 cm(WxHxD)
Weight : 980 g
Ex-Approval : ` II 2G C0158 EEx dem [ib] IIC T6
BVS 94.C.2071 U, BVS 94.Y.6003 U